Troubleshooting - Bissell 1200 User Manual

Troubleshooting

Cleaner will not run
Possible Causes
Power cord not plugged in.
1
Blown fuse/tripped breaker.
2
The unit is not sitting flat on the carpeting.
3
Vacuum Flex Hose is not snapped
4
into place securely.
Unusual or Odd Noise
Possible Causes
Clean/Solution tank is out of fluid.
1
Reduced or No Spray
Possible Causes
Spray Tip clogged.
1
Clean/Solution tank is out of fluid.
2
Clean/Solution tank is not inserted
3
Into the unit securely.
No Suction
Possible Causes
Tank is full.
1
Dirty/Collection tank latch is not down.
2
Black Valve on the Dirty/Collection
3
Tank is missing.
ug203-6650_1200_805.indd 13 ug203-6650_1200_805.indd 13
Handsfree Cleaning
Remedies
Check electrical plug.
1
Replace household fuse or
2
reset breaker.
Remove what is obstructing the
3
floors surface.
Check to make sure the Vacuum
4
Flex Hose is snapped into place.
Remedies
Fill Clean Solution Tank.
1
Remedies
Clean Spray Tip.
1
Fill Clean/Solution Tank.
2
Gently press the Clean/Solution
3
Tank Until you see "bubbles"
coming from the base of the tank.
Remedies
Empty tank.
1
Push latch down, securely
2
into place.
Replace Black Valve into Dirty/
3
Collection tank.
13
11/1/05 11:44:31 AM 11/1/05 11:44:31 AM