Advertisement
Step 1: Check the parts
Prepare a Phillips screwdriver prior to assembling.
Parts name
Quantity
A Top plate
B Bottom plate
C Front pillar
D Back pillar and cover
Safty band
Back pillar (1)
Back pillar
cover (1)
Step 2: Attach the back pillar to the bottom plate
1
2
H
B
Packing box
D
3
H
C
Step 3: Attach the top plate
A
Step 4: Attach the shelf hanger
F
Parts name
E Glass shelf
1
F Shelf hanger
1
G Cap nut
2
H Big screw
1
I Small screw (for back pillar cover)
Back pillar cover
Arrow direction shows front.
Warning
Be careful not to pinch your fingers
during assembly.
Screw holes
C
H
Align the tip of the top plate with the front
pillar and place the top plate on the pillars.
G
Step 5: Attach the glass shelf
1
Quantity
1
1
Note
Be careful not to allow strong impact on the glass shelf to prevent breakage and cause injury.
2
2
16
2
* The tip of the locking button is splayed to fix the glass shelf to the back pillar.
Step 6: Install the TV
1
Warning
Be careful not to allow your hands or fingers to be
pinched between the TV and the TV stand.
Note
Place the TV on the top surface, aligning its front
corners with the front pillars of the stand.
2
Step 7: Install other equipment
Step 8: Attach the back pillar cover
1
2
Locking button
Pull
E
Locking button
Push
Locking
D
button
E
Caution label (top side of the glass shelf)
Safety band
Insert the buckle of the safety band into the
anchor point until it clicks.
Pull the safety band to take up the slack.
DVD player, etc.
Notes
• To prevent damage to cables, do not
Back pillar cover
• Do not bind the power cords together
I
forcibly attach the cover.
to prevent overheating.
Advertisement
