Fujitsu AOU30RLXEH Design & Technical Manual page 56

11) Switching functions for external output terminal
Functions of the external output terminal can be switched. For details, refer to "External input and
output".
Function number
60
12) Outdoor temperature zone boundary temperature A
Setting required if changing of the outdoor temperature setting for heat pump prohibition zone is re-
quired when heater selection control using outdoor temperature 1 and 2 are performed on the indoor
unit. For details, refer to "External input and output".
Function number
66
13) Outdoor temperature zone boundary temperature B
Setting required if changing of the outdoor temperature setting for heat pump only zone is required
when heater selection control using outdoor temperature 1 is performed on the indoor unit. For de-
tails, refer to "External input and output".
Function number
67
14) Fixed operation mode switching
Sets the operation mode to heat pump, heating only, or cooling only.
Function number
94
Setting value
00
09
10 Indoor unit fan operation status
12
Setting value
00
01
02
03
04
05
06
07
08
Setting value
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Setting value
00
01
02
- 52 -
Setting description
Operation status
Error status
Set point attainment status
Setting description
-4.0 °F (-20 °C)
-0.4 °F (-18 °C)
3.2 °F (-16 °C)
6.8 °F (-14 °C)
10.4 °F (-12 °C)
14.0°F (-10 °C)
17.6 °F (-8 °C)
21.2 °F (-6 °C)
24.8 °F (-4 °C)
Setting description
42.8 °F (6 °C)
14.0 °F (-10 °C)
17.6 °F (-8 °C)
21.2 °F (-6 °C)
24.8 °F (-4 °C)
28.4°F (-2 °C)
32.0 °F (0 °C)
35.6 °F (2 °C)
39.2 °F (4 °C)
42.8 °F (6 °C)
46.4 °F (8 °C)
50.0 °F (10 °C)
53.6 °F (12 °C)
57.2 °F (14 °C)
60.8 °F (16 °C)
64.4 °F (18 °C)
Setting description
Heat pump
Heating only
Cooling only
Factory setting
♦
Factory setting
♦
Factory setting
♦
Factory setting
♦