Remote Controller; Wireless Remote Controller - Fujitsu AOU30RLXEH Design & Technical Manual

2. Remote controller

2-1. Wireless remote controller

 Features
 Simple function setting
Setting of the air conditioner selection function is performed by remote controller.
 Weekly timer
Weekly timer can be easily set by wireless remote controller.
On and off can be set up to 4 times in a day, and up to 28 times in a week.
 Program timer
The program timer operates the on and off timer once within a 24-hour period.
 Sleep timer
The sleep timer function automatically corrects the temperature thermostat setting according to
the time setting to prevent excessive cooling and heating while sleeping.
Cooling operation/Dry operation
When the sleep timer is set, the set temperature
automatically rises 2 °F (1 °C) every hour. The
set temperature can rise up to a maximum of 4 °F
(2 °C).
60 min
• Temperature setting by 1 °F or by 0.5 °C possible.
• 5-mode timer setup (on, off, weekly, program, and sleep) available.
NOTE: When performing server room control, only the weekly timer
is effective.
• Easy operation.
• Easy to change custom code (max. 4 custom code).
• Can be used jointly with wired remote controllers.
NOTE: When performing server room control, wired remote control-
ler cannot be connected.
Timer setting
4 °F (2 °C)
2 °F (1 °C)
- 8 -
Heating operation
When the sleep timer is set, the set temperature
automatically drops 2 °F (1 °C) every 30 minutes.
The set temperature can drop to a maximum of 8
°F (4 °C).
2°F (1°C) 4°F (2°C)
30 min
60 min
90 min
Timer setting
6°F (3°C)
8°F (4°C)