Thermistors Removal; Solenoid Coils; Eev Coils Removal; Pressure Sensors Removal - Fujitsu Airstage VR-II Series Service Manual

11. THERMISTORS removal

Cut the binder.
12. SOLENOID COILS (4way valve and Solenoid valves) removal
Remove the mounting screw.

13. EEV COILS removal

Remove the EEV coil by hand.
There are two coils.

14. PRESSURE SENSORS removal

Remove the PRESSURE SENSOR
with wrench.
There are two sensors.
(High and Low pressure)
Note the tightening torque at the installation.
Tightening torque is 15 1.5N m.
Remove the heat insulation.
Remove the SOLENOID COIL.
06-08