Panel Btm Removal; Control Box Open - Fujitsu Airstage VR-II Series Service Manual

9. PANEL BTM removal

Screws (7 places)
Remove the 7 mounting screws.

10. Control Box open

Screws (2 places)
Remove the 2 mounting screws.
Remove the wires from edging saddle.
(3 places)
Screws
(6 places)
Remove the 6 mounting screws.
Hook (3 places)
Remove the PANEL BTM by sliding toward.
Loose or remove the cable ties.
(3 places)
Remove the Wire plate by sliding rightward.
Handle
Open the Control Box with handle.
Remove the locking stopper
of edging saddle. (3 places)