Eizo ColorEdge CG2420 User Manual page 29

Input Signal
(The setting range of each function
differs depending
on the input signal.)
Function
√: Settable -: Not settable
DVI DisplayPort
Input Range √
Noise Reduction -
*3 Only enabled during DisplayPort input or HDMI input
Adjustable
range
HDMI
*3
√ √ Auto Depending on the external device, the black and white levels
Full in the video signal output to the monitor may be restricted. If
Limited the signal is displayed on the monitor in its restricted form, the
(109% White) blacks will be faint, the whites dull, and contrast will be re-
Limited duced. The brightness range of such signals can be extended
to match the actual contrast ratio of the monitor.
- √ On The small noises that occur in dark areas of an image are
Off reduced. Use this function to reduce noise and roughness in
images.
- 29 -
Description
• "Auto"
The monitor automatically recognizes the brightness
range of input signals and displays images appropriately.
• "Full"
The input signal brightness range is not extended.
• "Limited (109% White)"
The brightness range of the input signal is extended from
64 - 1019 to 0 - 1023 for display.
• "Limited"
The brightness range of the input signal is extended from
64 - 940 to 0 - 1023 for display.
Chapter 3 Advanced Adjustments/Settings
Note
-
• Using the Noise Reduction
function may lead to dete-
rioration of fine images.