30
VAIO Computer Reference Manual
Setting the CMOS Jumper
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
1
Remove the system cover (see
page
24).
2
Use long-nose pliers to reposition the CMOS jumper as needed.
Do not change the position of this jumper unless directed by a service technician.
3
Replace the system cover (see
page 25).
"Removing the System Cover" on
"Replacing the System Cover"
MAN007.VSD
on