Service Information; Jumper Setting On Hard Disk Drive - Sony PCV-J200 Service Manual

5-1.

JUMPER SETTING ON HARD DISK DRIVE

The hard disk drive of service parts can be used without changing factory jumper setting, when it was replaced for service.
Model
PCV-J200
SECTION 5

SERVICE INFORMATION

Part No. Maker
A-8048-262-A Seagate
Code
ST340823A
7 1
Master/Slave selection
Jumper setting
8 2
Limit capacity to 32 Gbytes
Master or single drive
Drive is a slave
Master with a non-ATA
compatible slave
Enable cable select
5-1
Capacity
Memo
(formatted)
40 GB 177293813
Factory setting
Confidential
PCV-J200 (UC)