Manual
7.5
Switching Over the Display Levels (Process Operation Mode)
(Example 5)
D Problem
The operating panel should be switched in four modes with the key tA5. The "active opera-
ting mode" is displayed by the diodes L4, L5, L6 and L7. At the same time the "active opera-
ting mode" is shown on the display dd3.
The following control and display elements are to be switched
Displays:
dA1, dd1
Keys:
tA2, tA3
Four internal setpoints are set by the keys tA2, tA3 which are displayed on dA1, dd1.
SIPART DR24 6DR2410
C79000-G7476-C153-03
7.5 Switching Over the Display Levels (Process Operation Mode)
7 User Examples
191