Parameterization Mode Onpa (Online Parameters) - Siemens SIPART DR24 Manual

3 Operation
3.3 Configuring Mode (Parameterization and Configuring Mode)

3.3.1 Parameterization Mode onPA (Online Parameters)

3.3.1 Parameterization Mode onPA (Online Parameters)
In the parameterization mode onPA the parameters are arranged whose effect on the process
when they are changed can be observed. The other parameters are arranged in the configuring
modes oFPA and CLPA (see chapter 3.3.3, page 145 and 3.3.4, page 148).
The online parameters are listed in table 1. The parameters against a white background (repeti-
tion rate dr for the digital displays and the switchable decadic (Pd) and linear parameters (PL)
are always accessible. The parameters against a gray background are the private parameters
of the complex functions and only appear when the functions are defined in FdEF.
Parameter
value
dark for switch-
able parameters,
name of the function for
private parameters
Parameter name
dr ... tE
All unnamed control and display elements have the wired function
Figure 3-4 Control and display elements in the parameterization mode onPA
136
dd1
L1
L2
L3
L4
L5
L6
dA1 dA2
L14
L7
L8
L9
L10
L11
dd2
L13
tA7
dd3 L12
Adjustment parameter name and
function name
tA1
Exit key↗: return to process
Exit LED:
tA2
Adjustment parameter value (with fast
action)
tA3
tA4
Enter key:
Enter LED:
tA5
tA6
Manual
preselection mode after onPA
flashes
no function
off
SIPART DR24 6DR2410
C79000-G7476-C153-03