Fuel System; Specifications - Mazda 6 MPS 2005 Training Manual Supplement

L3 Turbo

Fuel System

Specifications:

Injector
Pressure regulator control pressure
(within the fuel tank)
Relief valve control pressure
(within the fuel delivery pipe)
Pre delivery fuel pump type
High pressure fuel pump type
Fuel tank capacity
N OTE: The L3 Turbo engine was designed to consume 98 octane (RON (
Octane Number)) fuel. If 98 octane (RON) fuel is not availabel the vehicle can
be operated using 95 octane (RON) fuel which will result in decreased powe
output. Using fuel with lower octane can cause engine knocking an serious
engine damage.
NOTE: Working on the high pressure fuel system can be dangerous. Always release
fuel pressure before opening the high pressure fuel s
pressure remove the fuel pump relay, start engine and allow engine to stop.
Then crank engine with the starter until fuel pressure is discharged.
01-32
Item
Type
Type of fuel delivery
Type of drive
Service Training Mazda6 MPS Supplement
Specification
Electro-magnetic (1.0...1.2 Ohm)
kPa
Mpa
L
ystem. To release the
Engine
Top-feed
Voltage
Approx. 430
Approx. 13
Electric
Mechanic
60
M6_MPS_01T002
Research
r