Mercedes-Benz 300 E 1990 Owner's Manual page 53

Combination Switch
Low beam (with exterior lamp
1
switch turned to position I D )
2 High beam (with exterior lamp
switch turned to position I D )
3 High beam flasher (high beam
available independent of ex­
terior lamp switch position)
4 Turn signals, right
5 Turn signals, left
To operate the turn signals, move
the combination switch past the
point of resistance (up or down).
The switch is automatically can­
celed when the steering wheel is
turned to a large enough degree.
To signal minor directional
changes, such as changing lanes
on a highway, move combination
switch to the point of resistance
only and hold it there.
6 Control for
• windshield washer system
• headlamp cleaning system
(will work only with exterior
lamp switch in position ^oo-
° r I D )
Canada only:
O
Also in position
the engine is running)
When the washer system is
activated, the wipers also
operate for a limited time.
The reservoir, hoses, and
nozzles of the windshield
washer and headlamp cleaning
systems are automatically
heated.
7 Windshield wiper control
0 Wiper off
1 Intermittent wiping
II Normal wiper speed
III Fast wiper speed
when
,
C
51