Packing Contents; Installing The Auxiliary Handle - Ryobi G-2240 Owner's Operating Manual

CAUTION. This packaging contains
sharp objects. Take care when
unpacking. Remove the machine,
together with the accessories supplied, from the
packaging. Check carefully to ensure that the
machine is in good condition and account for all the
accessories listed in this manual. Also make sure
that all the accessories are complete.

PACKING CONTENTS

• Angle grinder
• Auxiliary handle
• Wheel guard
• Wrench and hex key
• Operator's manual.
WARNING. If any parts are damaged or
missing, do not operate this product until
the parts are replaced. Use of this
product with damaged or missing parts
could result in serious personal injury.
WARNING. Your grinder should never
be connected to power supply when you
are assembling parts, making
adjustments, installing or removing
grinding wheels, or when not in use.
Disconnecting your grinder will prevent
accidental starting that could cause
serious injury.
WARNING. Do not attempt to modify this
product or create accessories not
recommended for use with this product.
Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious
personal injury.

INSTALLING THE AUXILIARY HANDLE

WARNING. Failure to unplug your grinder
could result in accidental starting causing
serious injury.
Install the auxiliary handle by screwing it into the
side of the gear housing, Fig.1.
Note: The handle can be installed on either the left
or right side or top of the grinder, depending on
operator preference. It must always be used to
prevent loss of control and possible serious injury.
Tighten auxiliary handle securely.
UNPACKING
If any parts are found to be missing, the machine
and its accessories should be returned together in
their original packaging to the retailer. Do not throw
the packaging away, keep it safe throughout the
guarantee period, then recycle if possible,
otherwise dispose of it by the proper means. Do
not let children play with empty plastic bags due to
the risk of suffocation.
ASSEMBLY
8
Fig. 1
TO
TIGHTEN
TO
LOOSEN
DISC
FLANGE
FLAT(S)
Fig. 2
WRENCH
CLAMP
NUT
GRINDING
WHEEL
SPINDLE
SPINDLE
LOCK BUTTON