Ryobi G-2240 Owner's Operating Manual page 14

Rotate guard to the correct position as shown in
figures 3, 4, and 5.
Tighten clamp screw securely.
Note: Be sure the tabs on the guard are seated in
the groove in the bearing cap.
Reassemble disc flange, grinding wheel, and clamp
nut.
Refer to "INSTALLING THE GRINDING WHEEL"
instructions on page 9.
Depress the spindle lock button and rotate the
wheel clockwise until the spindle locks in position.
Securely tighten the clamp nut with the wrench
provided.
LUBRICATION
All of the bearings in this tool are lubricated with a
sufficient amount of high grade lubricant for the life
of the unit under normal operating conditions.
Therefore, no further lubrication is required.
Now that you have purchased your tool, should a need ever exist of repair or service, simply contact your
nearest Ryobi Authorised Service Centre or other qualified service organisation. Be sure to provide all
pertinent facts when you call or visit.
SYMBOL SIGNAL
DANGER:
WARNING
CAUTION
CAUTION
MAINTENANCE
REPAIR
This product does not contain any parts that can be
repaired by the consumer. Contact a qualified
specialist to have it checked and repaired.
STORAGE
Clean the product as described.
Store the product and its accessories in a dry,
frost-free place.
Always store the product in a place that is
inaccessible to children.
The ideal storage temperature is between 10°C
and 30°C.
We recommend using the original package for
storage or covering the product with a suitable
cloth to protect it against dust.
SERVICE
SYMBOLS
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result
in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
13