Download
Share
Print this page
Ryobi G-850 Owner's Operating Manual
  1. Manuals
  2. Brands
  3. Ryobi Manuals
  4. Grinder
  5. G-850
  6. Owner's operating manual
Ryobi G-850 Owner's Operating Manual

Ryobi G-850 Owner's Operating Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
G-850

Advertisement

loading

Related Manuals for Ryobi G-850

Summary of Contents for Ryobi G-850

  • Page 1 G-850...
  • Page 2 wheel guard Spindle Spindle Cut off wheel guard Collar screw Back flange Back flange Grinding wheel Dry diamond wheel Lock nut Lock nut Spindle Backing pad Sanding disc Lock nut Wire brush...
  • Page 3 Avoid accidental starting. Ensure the switch is in THANK YOU FOR BUYING A RYOBI PRODUCT. the off-position before plugging in. Carrying To ensure your safety and satisfaction, carefully read power tools with your finger on the switch or through this OWNER’S MANUAL before using the plugging in power tools that have the switch on product.
  • Page 4 ANGLE GRINDER SAFETY PRECAUTIONS 11. AVOID BOUNCING AND SNAGGING THE WHEEL, ESPECIALLY WHEN WORKING CORNERS, SHARP 1. ALWAYS USE PROPER GUARD WITH GRINDING EDGES ETC. This can cause loss of control and WHEEL. A guard protects operator from broken wheel kick-back.

  • Page 5: Specifications

    INSTRUCTIONS FOR SAFE HANDLING SIDE HANDLE The side handle used to guide and balance the tool can be 1. Make sure that the tool is only connected to the threaded into the front housing on either side of the tool, voltage marked on the name plate.

  • Page 6: Operation

    OPERATION Sanding discs range in grit from 16 (very coarse) to 180 (very fine). To obtain best results, select sanding discs SLIDE ON-OFF SWITCH WITH LOCK (Fig. 4) carefully. Many jobs require the use of several grit sizes and at times both “open coat and closed coat” discs are required The tool is switched “ON”...

  • Page 7: Maintenance

    After use, check the tool to make sure that it is in top condition. It is recommended that you take this tool to a RYOBI Authorized Service Center for a thorough cleaning and lubrication at least once a year. DO NOT MAKE ANY ADJUSTMENTS WHILE THE MOTOR IS IN MOTION.
  • Page 8 RYOBI tool (hereinafter called “the Product”), for which it was not designed, or is not suited is warranted by Ryobi (herein called “the and no repairs, alterations or modifications Company”) to be free from defects in material...