Connecting Video Components - Sony HT-SF370 Operating Instructions Manual

Connecting video components

The following illustration shows how to
connect video components such as DVD
player, DVD recorder, etc.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
DVD player,
DVD recorder cable television tuner
Audio signal
A
L
EZW-T100
R
AUDIO IN AUDIO IN
COAX IN
AUTO
VIDEO
SA-CD/CD TV
CAL MIC
DC5V 0.7A MAX
HDMI
DVD IN BD IN
DMPORT
A Coaxial digital cord (not supplied)
B Optical digital cord (not supplied)
Satellite tuner,
Audio signal
B
DIGITAL ANTENNA
AM
OPT IN OPT IN
SAT/CATV TV
ARC
SAT/CATV IN TV OUT
l : Signal flow
Notes
• If you connect a DVD player/recorder, be sure to
change the initial setting of the VIDEO button on
remote so that you can use the button to control
your DVD player/recorder. For details, see
"Changing the input button assignments" (page
57).
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
• Be sure to connect the video output of the DVD
player and DVD recorder to the TV, so that the
image is displayed on the TV. Refer to the
operating instructions of each connected
component for details.
• You cannot do recording on the DVD recorder via
this receiver. For details, refer to the operating
instructions supplied with the DVD recorder.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
23 US