Sony HT-SF370 Operating Instructions Manual page 38

Naming preset station
You can enter a name for preset stations.
These names (for example, "XYZ") appear on
the display when a station is selected.
Note that no more than one name can be
entered for each preset station.
1
Press TUNER repeatedly to
select the FM or AM band.
You can also press INPUT SELECTOR
+/– on the receiver.
2
Press PRESET +/– repeatedly
to select the preset station you
want to create an index name
for.
3
Press MENU/HOME.
4
Press V/v repeatedly until
"NAME IN" appears, then press
.
5
Create a name by using
V/v/B/b.
Press V/v repeatedly to select a character,
then press b to move the cursor to the
next position. Letters, numbers and other
symbols can be input for a radio station
name.
If you enter a wrong character
Press B/b repeatedly until the character to
be changed flashes, then press V/v
repeatedly to select the desired character.
6
Press .
"COMPLETE" appears on the display
and the station name is stored.
7
Press MENU/HOME.
38
US
Viewing the station name or
frequency on the display
When the receiver is set to "FM" or "AM",
you can check the frequency using the display.
Press DISPLAY.
Each time you press DISPLAY, the display
changes as shown.
a)
t Frequency
Station name
b)
FM Mode
a)
This is displayed if you have entered a name for a
preset station.
b)
Returns to the original display when several
seconds have elapsed.
b)
t