Path; Performance; Managing System Alarms; Viewing And Clearing Current Alarms - 3Com SuperStack II PathBuilder S330 Reference Manual

5
Managing System
Alarms
Viewing and Clearing
Current Alarms
P B
ATH UILDER
P
AND ERFORMANCE
This chapter tells you how to access and manage SuperStack II PathBuilder S330
and S310 WAN access switch (PathBuilder S330/S310) system alarms, how to use
available loopbacks, and how to view performance statistics for the PathBuilder
S330/S310. It contains the following sections:

Managing System Alarms

n
Using Loopbacks
n
Viewing Performance and ATM Statistics
n
Viewing Virtual Circuit Statistics
n
The PathBuilder S330 detects certain events and reports corresponding alarms and
traps to the NMS station(s). These events are categorized as major alarms, minor
alarms, and information. When an alarm occurs, an alarm indicator is displayed on
the current menu or display, as described under "Alarm Indicator" in Chapter 3.
To view a list of current alarms, follow these steps:
1 From the Main menu, select [3] Fault Management to display the Fault
Management menu shown in Figure 133.
Figure 133 Fault Management Menu
S330 D
IAGNOSTICS
S
TATISTICS