Sony DAV-LF1 Operating Instructions Manual page 93

Home theater systems: micro satellite system
Hide thumbs Also See for DAV-LF1:
Table of Contents

Advertisement

Customize
Dual Mono
Surround Speaker
Reverse*
Dimmer
Lip Sync
* This setting appears when you set "Surround
Speaker" to "Surround Speaker Yes" in
"Speaker Setup."
C/X/x/c/
ENTER
With cover opened.
1
Press AMP MENU.
2
Press X/x repeatedly until the item you
want to set appears in the front panel
display.
xSpeaker Setup
Sets the speaker size, distance, and place.
xLevel
Sets the balance and level of the each
speaker, and turns on/off the test tone.
3
Press ENTER or c.
4
Press X/x to select the desired item,
then press ENTER or c.
To set the item, press X/x, then press
ENTER or AMP MENU.
Dual Mono Main
Dual Mono Sub
Dual Mono Main/Sub
Dual Mono Main+Sub
Reverse Off SL SR
Reverse On SR SL
Dimmer Off
Dimmer On
Lip Sync Off
Lip Sync On
AMP MENU
You can set the following items. The
default settings are underlined.
Note
While a DVD is being played, Speaker Setup and
Dual Mono cannot be set.
xSpaker Setup
Center
Center Speaker Yes: Select
Speaker
this if you use a center
speaker.
Center Speaker No: Select
this if no center speaker is
used.
Surround
Surround Speaker Yes: Select
Speaker
this if you use surround
speakers.
Surround Speaker No: Select
this if no surround speaker is
used.
Front
Front speaker distance from
Speaker
the listening position can be
Distance
set in 0.2 meter increments
a)
1.6m
from 1.0 to 7.0 meters.
Center
Center speaker distance can
Speaker
be moved up to 1.6 meters
b)
Distance
closer to the listening position
a)
1.6m
from the front speaker
distance, in 0.2 meter
increments.
Surround
Surround speaker distance
Speaker
can be moved up to 4.6 meters
b)
Distance
closer to the listening position
a)
1.6m
from the front speaker
distance, in 0.2 meter
increments.
Surround
Surround Speaker Position
Speaker
Behind: Select this if surround
b)
Position
speakers are located in the
back area of the listening
position.
Surround Speaker Position
Side: Select this if surround
speakers are located in the
side area of the listening
position.
a)
When you perform the Quick Setup (page 35),
the default settings are changed.
b)
This setting appears when you set the
corresponding speaker to "Yes" in "Speaker
Setup" (page 93).
continued
93
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents