Step 1: Speaker System Hookup; Control Unit - Sony DAV-LF1 Operating Instructions Manual

Step 1: Speaker System Hookup

Connect the supplied speaker system using the supplied speaker cords by matching the colors of the
jacks to those of the cords. Do not connect any speakers other than those supplied with this system.
To obtain the best possible surround sound, specify the speaker parameters (distance, level, etc.) on
page 37.
Connecting the subwoofer
Connect the system connector of the control unit to the SYSTEM CONNECTOR jack of the
subwoofer.
To insert the plug of the SYSTEM CONNECTOR cord, press and hold both sides of the plug.
OUTPUT(TO TV)
PHONES
REMOTE
CONTROL
Notes
• Do not handle the clear plastic panel when you move or operate the control unit as it may break.
• Before connecting/disconnecting the SYSTEM CONNECTOR cord, make sure the AC power cord (mains lead) is
disconnected from the wall outlet (mains).
Required cords
Speaker cords
The connector and the color tube of the speaker cords are the same color as the label of the jacks to be
connected.
Subwoofer
EURO AV ANTENNA
AM
VIDEO VIDEO DIR-T1
IN IN
FRONT R CENTER FRONT L
IMPEDANCE USE 4
SPEAKER
AUDIO AUDIO FM
IN IN 75
COAXIAL
OPTICAL
DIGITAL IN
L L
R R
VIDEO SAT SYSYTEM CONNECTOR
SYSTEM CONNECTOR cord
(–)
(+)

Control unit

(–)
(+)
color tube
continued
15 GB