Sony DAV-LF1 Operating Instructions Manual page 26

Notes
• Make connections securely to prevent unwanted noise.
• Refer to the instructions supplied with the TV.
• The system cannot output component video signals.
• The system cannot output an audio signal to the connected TV. Only the audio signal of the TV is output from the
system speakers.
Tips
• When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select any sound
field other than "Auto Format Direct Auto" or "2Channel Stereo" (page 63).
• If a distortion occurs during playback of the component that is connected to the VIDEO AUDIO IN jacks, connect
the component to the SAT AUDIO IN jacks.
If you connect a digital satellite receiver with an OPTICAL OUT jack
The digital satellite receiver can be connected to the SAT OPTICAL DIGITAL IN jack instead of the
SAT AUDIO IN (L/R) jacks of the system.
The system can accept both the digital and analogue signals. Digital signals have priority over analogue
signals. If the digital signal ceases, the analogue signal will be processed after 2 seconds.
If you connect a digital satellite receiver without an OPTICAL OUT jack
Connect the digital satellite receiver to the SAT AUDIO IN (L/R) jacks only of the system.
26 GB
EURO AV
OUTPUT(TO TV)
VIDEO VIDEO
IN
AUDIO AUDIO
IN
PHONES
L
REMOTE
CONTROL
R
VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
TV, VCR, etc.
ANTENNA
AM
DIR-T1
IN
FRONT R
IMPEDANCE USE 4
FM
IN
75
COAXIAL
OPTICAL
DIGITAL IN
L
R
SAT SYSYTEM CONNECTOR
OUT OUT
OPTICAL
VIDEO
DIGITAL
OUT
OUT
AUDIO
OUT
L
R
Digital satellite receiver or
PlayStation 2 etc.
CENTER FRONT L
SPEAKER
IN
EURO AV
INTPUT(FROM VIDEO)
TV