Table of Contents
Advertisement
Step 3: TV and Video Component Hookups
Required cords
Video cord for connecting a TV monitor
Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded sleeves to the appropriate jacks on
the components.
Yellow (Video)
White (L/audio)
Red (R/audio)
Jacks for connecting video components
Connect a
TV monitor
VCR, etc.
Digital satellite receiver, etc.
z
When using the S VIDEO jack instead of the video jacks
Your TV monitor must also be connected via an S VIDEO jack. S video signals are on a separate bus from the
video signals and will not be output through the video jacks.
z
When using the COMPONENT VIDEO OUTPUT jacks (Y, P
Your TV monitor must also be connected via COMPONENT VIDEO OUTPUT jacks (Y, P
TV accept progressive format signals, you must use this connection and set "COMPONENT OUT" to
"PROGRESSIVE" in "SCREEN SETUP" (page 71).
Notes
• When you select VIDEO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but
not from the VIDEO 1 VIDEO OUTPUT and AUDIO OUTPUT L/R jacks.
• When you use the Video 1 line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH
STEREO mode, the line outputs may not function properly.
• When "PROGRESSIVE" is selected in "SCREEN SETUP," no signal is output from the MONITOR OUTPUT
jacks.
• When the mode of the system is set to "DVD," the signal is output from the S VIDEO or COMPONENT VIDEO
OUTPUT jacks.
• When the mode of the system is set to "DVD" and "PROGRESSIVE" is selected in "SCREEN SETUP," the
signal is output only from the COMPONENT VIDEO OUTPUT jacks.
To the
MONITOR OUTPUT jack
VIDEO 1 jacks
VIDEO 2 jacks
Yellow
Yellow (Video)
White (L/audio)
Red (R/audio)
/C
P
C
) instead of the video jacks
B
B,
R/
R
/C
B
, P
/C
). If your
B
R
R
continued
GB
27
Hide quick links:
Advertisement
Table of Contents
