Sony DAV-DS1000 Operating Instructions Manual page 21

Setting up the wireless speakers (Wireless setting)
You do not need to connect the rear speakers to the system; audio signals are transmitted from
the connected front speakers to the rear speakers. You cannot use any speakers other than those
supplied with this system.
Note
When you use the speakers in the Wireless setting, make sure to set "CONNECT" to "WIRELESS" in "SPEAKER
SETUP" (page 33).
Terminals for connecting the speakers
Connect the
To the
Front speakers
WIRELESS REAR L and R jacks
SPEAKER FRONT L (white) and R (red) jacks
Center speaker
SPEAKER CENTER (green) jack
Rear speakers
Wall outlet
Wireless data output cord
AC power cord
Connect the AC power cords of the rear speakers to wall outlet, after all connections are
finished.
Speaker cord
The connector and the color tube of the speaker cords are the same color as the label of the
jacks to be connected.
Connect the supplied speaker system to the subwoofer using the supplied speaker cords by
matching the colors of the jacks to those of the cords. Do not connect any speakers other than
those supplied with this system.
To obtain the best possible surround sound, specify the speaker parameters (distance, level, etc.)
on page 30.
(+)
(–)
Color tube
Using the
Wireless data output cords
Speaker cords
Speaker cord
AC power cords
Grey
(+)
(–)
Black
continued
GB
21