Step 3: Tv And Video Component Hookups - Sony DAV-S500 Operating Instructions Manual

Step 3: TV and Video Component Hookups
Video cord for connecting a TV monitor
Yellow a r-D
Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the colour-coded pins to the appropriate jacks on the
components.
Yellow (Video)
White (L/audio)
Red (R/audio)
Yellow (Video)
White (Uaudio)
Red (R/audio)
Connect a
To the
TV monitor MONITOR OUT jack
VCR VIDEO 1 jacks
Digital satellite receiver VIDEO 2 iacks
*@'When using the S-video jack instead of the video jacks
Your TV monitor must also be connected via an S-video jack. S-video signals are on a separate bus from the video
signals and will not be output through the video jacks.
l
When you select VIDEO 1 using the FUNCTION button, the signal is output from the front LiR speakers, but
not from the VIDEO 1 VIDEO OUT and AUDIO OUT L/R jacks,
l
When you use the Video 1 line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH
STEREO mode, the line outputs may not function properly.
22