Table of Contents
Advertisement
Step 3: TV and Video Component Hookups
Required cords
Video cord for connecting a TV monitor
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the
components.
Jacks for connecting video components
Connect a
TV monitor
VCR
Digital satellite receiver
z
When using the S video jack instead of the video jacks
Your TV monitor must also be connected via an S video jack. S video signals are on a separate bus from the video
signals and will not be output through the video jacks.
z
When using the COMPONENT VIDEO OUT jacks (Y, P
Your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y, P
accept progressive format signals, you must use this connection and set "COMPONENT OUT" to
"PROGRESSIVE" in "SCREEN SETUP" (page 68).
Notes
• When you select VIDEO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but
not from the VIDEO 1 VIDEO OUT and AUDIO OUT L/R jacks.
• When you use the Video 1 line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH
STEREO mode, the line outputs may not function properly.
• When "PROGRESSIVE" is selected in "SCREEN SETUP," no signal is output from the MONITOR OUT or S
VIDEO OUT jacks.
• When the mode of the system is set to "DVD," the signal is output from the S VIDEO OUT or COMPONENT
OUT jacks.
• When the mode of the system is set to "DVD" and "PROGRESSIVE" is selected in "SCREEN SETUP," the
signal is output only from the COMPONENT OUT jacks.
GB
22
Yellow
Yellow (Video)
White (L/audio)
Red (R/audio)
To the
MONITOR OUT jack
VIDEO 1 jacks
VIDEO 2 jacks
Yellow
Yellow (Video)
White (L/audio)
Red (R/audio)
/C
P
C
) instead of the video jacks
B
B,
R/
R
/C
B
B
, P
/C
). If your TV
R
R
Hide quick links:
Advertisement
Table of Contents
