Download Print this page

Intex Fast-Fill AP619C Owner's Manual page 2

Electric air pump.

Advertisement

SERVICING OF A DOUBLE-INSULATED PRODUCT:
In a double-insulated product, two systems of insulation are provided instead of grounding. No
grounding means is provided on a double-insulated product, nor should a means for grounding
be added to the product. Servicing of a double-insulated product requires extreme care and knowledge
of the system, and should be done only by qualified service personnel. Replacement parts for a
double-insulated product must be identical to those parts in the product. A double-insulated product
is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED" and with the symbol
General
• This appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
• For inflatable products with a total air volume up to 2 cubic meter (70 cubic feet), which correspond
to an expected inflation time of about 5 min and 30 sec.
Maintenance instructions:
• No air pump maintenance is required. Air pump has no user serviceable parts.
• For cleaning use only mild soapy solution. Do not use any chemicals.
• In case of repairs, use only common PVC repair glue and patches.
7
NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale. Due to a
policy of continuous product improvement, Intex reserves the right to change specifications and
appearance, which may result in updates to the instruction manual, without notice.
INFLATION
1. Plug in the AC line cord into an AC electrical outlet. See Fig (1).
220 – 240 V
FIG (1)
2. Slide the switch up to the inflation mark (
READ AND SAVE THESE INSTRUCTIONS
(150PO) AP619C BUILT-IN ELECTRIC PUMP ENGLISH 4.875" X 7.25" 06/15/2018
OPERATING INSTRUCTIONS
PARTS REFERENCE
6
8
110 -120 V
Page 2
Part Descriptions:
2
1. AC line cord
3
2. Switch
4
3. Inflation mark (
5
4. Off mark (
5. Deflation mark (
6. Air passage
7. Cord compartment
8. Airbed
1
). See Fig (2).
150
English
PO
.
)
)
)
FIG (2)

Advertisement

loading