Sony 4-130-031-11(3) Operating Instructions Manual page 7

Indicators on the display
1 2 3
qd
Name Function
A LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
B SLEEP
Lights up when the sleep timer is
activated (page 51).
C Playback
The letters (L, C, R, etc.) indicate
channel
the channels being played back.
indicators
The boxes around the letters vary
to show how the receiver
downmixes the source sound.
L Front Left
R Front Right
C Center (monaural)
SL Surround Left
SR
Surround Right
S Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
D
D
Lights up when receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you have
made digital connections.
E S-AIR
Lights up when the S-AIR
transmitter (not supplied) is
connected.
4 5 6
qs qa q; 9
L
C R
SW SL SR
Name Function
F HDMI
Lights up when a playback
component is connected to this
receiver using an HDMI jack
(page 19).
G Preset
Lights up when using the receiver
station
to tune in radio stations you have
indicators
preset. For details on presetting
radio stations, see page 42.
H Tuner
Lights up when using the receiver
indicators
to tune in radio stations (page 41),
etc.
I COAX
Lights up when the source signal
is a digital signal being input
through the COAX IN jack.
J OPT
Lights up when the source signal
is a digital signal being input
through the OPT IN jack.
K
PL/
"
PLII receiver applies Pro Logic
processing to 2 channel signals in
order to output the center and
surround channel signals.
"
Logic II Movie/Music decoder is
activated.
L DTS
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format disc,
be sure that you have made digital
connections.
M SW
Lights up when the audio signal is
output from the SUBWOOFER
jack.
7 8
PL" lights up when the
PLII" lights up when the Pro
7 GB