Sony 4-130-031-11(3) Operating Instructions Manual page 34

Menu Parameters
[Display] [Display]
S-AIR settings S-AIR ID
[S-AIR] [S-AIR ID]
(page 52)
PAIRING
[PAIRING]
S-AIR mode
[MODE]
RF Change
[RF CHNG]
RF Power
[RF POWER]
S-AIR standby
[STBY]
a)
For details, refer to the page in the parentheses.
b)
"CONTROL FOR HDMI" scroll across the display, then "CONTROL" appears.
c)
This parameter is only available when the result of the Auto Calibration is saved.
d)
When the Auto Calibration result is saved, you can adjust the setting in 0.01 meter increment.
e)
This parameter is only available when SAT input is selected.
f)
This parameter is only available if the S-AIR transmitter (not supplied) is inserted to the EZW-T100 slot on
the receiver.
g)
This parameter is only available when using the EZW-T100A wireless transceiver (for model of area code
CEL, CEK only).
34 GB
f)
f)
f)
f)
f)g)
f)
Settings
ID A, ID B, ID C
START, CONDIN
PARTY, SEPARATE
RF AUTO, RF ON, RF OFF
PWR HIGH, PWR LOW
STBY ON, STBY OFF
Initial setting
ID A
START
PARTY
RF AUTO
PWR HIGH
STBY OFF