Connecting The Speakers - Sony 3-398-069-14(1) Operating Instructions Manual

To remove the panel cover of the control unit
Before connecting the cables, remove the panel cover from the control unit.
1 Connecting the Control unit
Connect the system connector of the control unit to the SYSTEM CONTROL jack on the bottom of the
subwoofer.
Insert the plug of the SYSTEM CONTROL connector, then secure the screws of the plug.
Bottom of the subwoofer
Plug
Screws

2 Connecting the Speakers

Insert the speaker connector of the front left speaker into the FRONT L jack, and insert the speaker
connector of the front right speaker into the FRONT R jack on the bottom of the subwoofer.
16
GB
FRONT R FRONT L
SPEAKER IMPEDANCE USE 3
SYSTEM CONTROL
ONLY FOR HCD-F200
SYSTEM CONTROL cable
Push the B mark on the left side
of the panel cover, then slide to
the right.
Rear of the control unit