Settings With Dip Switches - Fujitsu D2529 Technical Manual

Settings with DIP switches

Figure 10: LAN connector service LAN controller
LAN 1 LAN transfer
rate
LAN 2 LAN
link/activity
3.8 Settings with DIP switches
Figure 11: DIP switch
I
Preset for switches 1 to 4 = Off.
Recovering System BIOS (recovery switch) - switch 1
Switch 1 enables recovery of the old system BIOS after an attempt to update
has failed. To restore the old system BIOS you need a Flash BIOS medium
(please call our customer service centre).
The system boots from the Flash BIOS medium (floppy disk, DVD/CD-
on
ROM, USB sstick) and reprograms the system BIOS on the board.
The System BIOS is started with the system BIOS from the system board
off
(default setting).
32
LED 2
green off
green on
green on
off
flashing
Technical Manual
LED 1
transfer rate 10 Mbit/s
transfer rate 100 Mbit/s
LAN connection
no LAN connection
LAN transfer
Features
D2529 (TX300 S4)