Settings With Switches - Fujitsu D2119 Technical Manual

Features
3.8

Settings with switches

Figure 8: DIP switch
I
Preset for switches 1 to 4 = Off.
Recovering System BIOS - switch 1
Switch 1 enables recovery of the old system BIOS after an attempt to update
has failed. To restore the old system BIOS you need a Flash BIOS Diskette
(please call our customer service centre).
on The system boots from the "Flash BIOS floppy disk" from Drive A and
reprograms the system BIOS on the board.
off The System BIOS is started with the system BIOS from the system board
(default setting).
Skipping the password query - switch 2
Switch 2 is used to define whether the password is queried at system startup, if
the password protection is enabled in BIOS Setup (in Security menu, the
Password field must be set to Enabled).
The password query is skipped. Passwords are deleted.
on
The password query is effective (default setting).
off
D2119 (RX300 S3)
Technical Manual
Settings with switches
29