Installing Filters - ActionTec R4500U User Manual

Usb/ethernet home dsl modem
Table of Contents

Advertisement

Note: If the Power, Ready and Link Lights on the Modem are not
solid green, check all connections to the Modem. If all connec-
tions are plugged in properly, call your DSL service provider.
The Modem is connected to a computer via USB. Next, install the phone filters as
described in "Installing the Phone Filters" on page 17.

Installing Filters

Filters allow the user to use the phone while online. All phones and other devices
(answering machines, fax machines, etc.) using the same line (i.e., using the same
phone number) as the DSL line must have a filter installed. To install a filter, follow
these instructions:
1. When the following window appears, get the Clear Bag from the DSL Quick
Start Kit and take out the Filters. Click Next to continue.
2. When the next window appears, unplug all phone cords from their respective
phone jacks, then click Next.
Caution: Do not unplug the black DSL cable from the phone
jack near your computer.
Chapter 2 Setting Up the Modem
17

Advertisement

Table of Contents
loading

Table of Contents