Page 1
Owner’s Manual Pop-Out Video Wall Model: DMVWSC4570XUL For additional instructions on installing more than one video mount, visit www.tripplite.com. 200x200 / 300x200 / 300x300 70" 154 lb. 400x200 / 400x300 / 400x400 (70 kg) 600x400 RATED Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com...
NOTE: Read the entire instruction manual before you start assembly and installation. WARNING • Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. If you have any questions regarding any of the instructions or warnings, please visit www.tripplite.com/support •...
Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service. M5x8 Wall Plate Connecting Plate Left Adapter Bracket Right Adapter Bracket Plastic Locks Combo Lock Package M...
Product Dimensions 26.4 in. (670 mm) 3.74 in. 2.12 in. (95 mm) (54 mm) Min: 7.9 in. (200 mm) Max: 23.6 in. (600 mm) 3.74 in. (95 mm) 26.4 in. (670 mm) 22.6 in. (575 mm) 20.7 in. (525 mm) 18.7 in.
Page 5
Assembly Attach Connecting Plates to Wall Plates Using the M5x8 screws (E), attach the connecting plates to the wall plates.
Page 6
Assembly Mount on Wood Stud Wall 55 mm (2.2 in.) O / 4.5 mm O / (3/16 in.) Mark the exact location of mounting holes Drill pilot holes Screw the wall plate onto the wall Using the ST6.3x55 screws (W-A) and D6 washers (W-C), attach wall plate assembly to the wall.
Page 7
Assembly Mount on Solid Brick or Concrete Block Wall 60 mm (2.4 in.) O / 10 mm O / (3/8 in.) Mark the exact Drill pilot location of holes mounting holes Screw the wall plate onto the wall Using the ST6.3x55 screws (W-A), D6 washers (W-C) and concrete anchors (W-B), attach wall plate assembly to the wall.
Assembly Install the Pop-Out Adapter Brackets Remove the hex key from the adapter brackets. Hex Key Ball Joint Push the pop-out arm until the ball joint snaps into place. VESA 600x400 Note: Make sure the arrow is pointing up. Top of the display.
Page 9
Assembly For Flat Back Screens M-A / M-B / M-C Note: Choose appropriate screws according to the type of screen. • Firmly secure the adapter brackets onto the display using the screws and any other necessary hardware components included with the unit.
Page 10
Assembly For Bump-Out Screen, Recessed Back Screen or to Access A/V Inputs M-C / M-D / M-E M-D / M-E M-D / M-E Note: Choose appropriate screws, washers and spacers (if necessary) according to the type of screen. • Firmly secure the adapter brackets onto the display using the screws and any other necessary hardware components included with the unit.
Page 11
Assembly Attach the Display onto the Wall Plate Locking Plate Use a padlock to Turn the locking plates downward to fasten the prevent the display wall plate. Tighten the screws to secure. from tampering or theft. Adjustment For fast alignment, push the display to the left or right.
Assembly Depth Adjustment Note: Only use the long end of the hex key when tightening the adjustment screws.
Page 15
Assembly Secure and Lock the Display Use the plastic locks (F) to lock the display in place. • Check that the bracket is secure and safe to use at regular intervals (at least every three months). • Please visit www.tripplite.com/support if you have any questions.
Page 16
LVW06-46T 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 19-02-229 93-3944_RevA...