Juniper ACX Series Quick Start Manual page 4

ACX500 Universal Access Routers Quick Start—ACX500 Indoor Routers
4
NOTE: You can mix and match the four RJ-45 and SFP
as the port numbers are unique.
For example, from the
with the RJ-45 port
the port numbers of the SFP and the RJ-45 ports are the same (
Figure 1 on page 4 and Figure 2 on page 5
and DC-powered ACX500 indoor routers, respectively.
Figure 1: Front Panel of the AC-Powered ACX500 Indoor Router
1— AC terminals
2— Management Ethernet port
3— TOD
Time of day ( ) RJ-45 port
4— Console port
5— USB port
6— Recovery switch
7— Alarm contact port
8— GPS antenna port
ports, you can use the SFP port
COMBO
, but not the RJ-45 port
0/1/1 PoE+
show the front panels of the AC-powered
9— ESD point
10—
Gigabit Ethernet RJ-45 ports (
11—
Gigabit Ethernet SFP ports (
12— Gigabit Ethernet SFP ports
13—
GPS LED (
14— External clocking ports
15—
System status LED (
16— Grounding terminals
COMBO ports as long
along
0/1/0
, because
0/1/0 PoE++
).
0/1/0
COMBO
)
COMBO
)
GPS 1PPS
)
SYS
)