Sony PCS-G70 Integration Manual page 51

Load Phone Book:
The contents of a phone book (the file above in the folder
described above) recorded in a Memory Stick are written
in the phone book of the communication terminal.
The contents cannot be returned to the former setting after
they are rewritten.
Clear Phone Book:
All contents of a phone book of the communication
terminal are erased.
The contents cannot be returned to the former setting after
they are erased.
Save Application:
The software of the system is saved in a Memory Stick.
However, an MCU option is not saved in the Memory
Stick. MCU software or LAN software is required sepa-
rately.
Save Call Log:
The communication log recorded in the communication
terminal is recorded and saved in a Memory Stick. A
maximum of 500 latest logs are recorded in the communi-
cation terminal. After execution, a file is created in the area
below in the Memory Stick.
\MSSONY\PRO\TVCONF\LOG\PCS_LOG.CSV
This file can be edited using Microsoft Excel.
Save System Log:
A debug log is recorded and saved in a Memory Stick. A
maximum of 1M bytes log is recorded and saved. After
execution, a file is created in the area below in the Memory
Stick.
\MSSONY\PRO\TVCONF\DEBUG\PCS_DEB.TXT
This file can be edited using Microsoft Notepad, WordPad,
or Word.
Save Setup:
All settings in the Setup menu are recorded and saved in a
Memory Stick. After execution, a file is created in the area
below in the Memory Stick.
\MSSONY\PRO\TVCONF\SETUP\PCS_STUP.CSV
This file can be edited using Microsoft Excel.
Load Setup:
The setup information
(\MSSONY\PRO\TVCONF\SETUP\PCS_STUP.CSV)
recorded in a Memory Stick is overwritten in the Setup
menu of the communication terminal. After execution, the
screen disappears once, and the launcher menu is displayed
in the same way as after the power is turned on.
The setup information cannot be returned to the former
setting after it is rewritten.
PCS-G70/G70P
Clear Setup:
All setting in the Setup menu of the communication
terminal are erased. After execution, the screen disappears
once, and the Initial Setup Wizard is displayed in the same
way as when the power is turned on first.
Load Application:
The software of the system recorded in a Memory Stick is
loaded.
System Reset:
Software reset is applied to the communication terminal.
After execution, the screen disappears once, and the
launcher menu is displayed in the same way as after the
power is turned on.
Clear Logs:
The communication log and the system log recorded in the
communication terminal are erased. When the communica-
tion log is erased, the content of the Log menu is also
erased. These information cannot be restored once they are
erased.
2-17