Table of Contents
Advertisement
Diagnostic
Code
H9
Average usage for Tuesday
H10
Average usage for Wednesday
H11
Average usage for Thursday
H12
Average usage for Friday
H13
Average usage for Saturday
5.5.3. Resetting the controller
CAUTION
Resetting the controller will delete all information stored in its volatile memory, except the
time, day and some of the history values from the non-volatile memory. This will require a
complete reprogramming of the controller as done from the initial power-up mode.
To reset the controller:
A
Press and hold
→ H0 and the system's set resin volume (or "F" mode) will be displayed.
B
If a history value other the "H0" is displayed, use
displayed.
C
To reset the controller, press and hold
→ The controller will be reset to an unprogrammed state.
D
Report to Chapter 5. Programming, page 38 to reprogram the controller.
Ref. MKT-IM-037 / B - 17.12.2018
Description
and
for 5 seconds.
Installer Manual Evolio 255 - Programming
to scroll through the settings until "H0" is
for 5 seconds.
Unit
Range
3
0 - 6553.6
m
3
0 - 6553.6
m
3
0 - 6553.6
m
3
0 - 6553.6
m
3
0 - 6553.6
m
49 / 90
Advertisement
Table of Contents
