Dvd Player With S Video And Audio Connectors - Sony QUALIA MBD-Q005 User Manual

DVD Player with
S VIDEO and Audio
Connectors
DVD player
Use this hookup if:
❑
Your DVD player does not have component (YP
Disconnect all power sources before making any connections.
1
Using an A/V cable, connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks.
2
Using an S VIDEO cable, connect the DVD player's S VIDEO jack to
the TV's S VIDEO jack.
Rear of Media Receiver Unit
S VIDEO
S VIDEO
cable
AUDIO-R
AUDIO-L
A/V cable
✍
If your DVD player is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
✍
To watch the DVD player, press TV/VIDEO repeatedly to select the
DVD input (VIDEO 1 in the illustration). If you have a non-Sony DVD
player, and want to set up the TV remote control to operate the DVD
player you must program the remote control. See "Programming the
Remote Control" on page 64.
✍
To control DVD functions with the TV remote control, see "Operating
a DVD Player" on page 67.
✍
To label video inputs to easily identify equipment connected to the
TV, see the instructions for setting up Video Labels on page 125.
S VIDEO
VIDEO
AUDIO L (MONO)
R
1 3
VIDEO IN
VIDEO
Setting Up the TV
P ) jacks.
B R
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
45