Dvd Player With S Video And Audio Connectors - Sony KDF-42E2000 Operating Instructions Manual

DVD Player with
S VIDEO and Audio
Connectors
DVD player
34
Use this hookup if:
❑
Your DVD player does not have component (YP
Disconnect all power sources before making any connections.
1
Use an A/V cable to connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks.
2
Use an S VIDEO cable to connect the DVD player's S VIDEO jack to
the TV's S VIDEO jack.
S VIDEO
S VIDEO
S VIDEO
cable
VIDEO
AUDIO
AUDIO-R
AUDIO-L
A/V cable
✍
If your DVD player is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.
✍
To watch a DVD, press TV/VIDEO repeatedly to select the DVD
input (VIDEO 1 in the illustration). If you have a non-Sony DVD
player and want to set up the TV remote control to operate it,
you must program the remote control. See "Programming the
Remote Control" on page 41.
✍
To control DVD functions with the TV remote control, see
"Operating a DVD Player or DVD Changer" on page 43.
✍
To easily identify equipment connected to the TV, see the
instructions for setting up Label Video Inputs on page 71.
Rear of TV
1 3
L
(MONO)
R
VIDEO IN
VIDEO
P ) jacks.
B R
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.