Selecting An I.link Device - Sony QUALIA MBD-Q005 User Manual

Using i.LINK

Selecting an i.LINK Device

104
Before an i.LINK device can be viewed, it must first be selected via the
i.LINK Device List.
1
Connect the i.LINK device that you wish to operate.
✍
For instructions on connecting i.LINK devices, see page 102.
2
Press on the media receiver unit or the remote control.
i.LINK
i.LINK Device List
DTV
Digital VCR
Status:
Viewing.
The TV (DTV), along with all devices connected by i.LINK to the TV,
appear on the i.LINK Device List.
Devices that are not supported by the TV appear on the Device List as
"Other Device," but cannot be controlled using the TV's remote control
or on-screen i.LINK Control Panel. For these devices, use the remote
control supplied with the device.
3
Press V v to navigate among the i.LINK-connected devices.
or
✍
i.LINK devices can be connected to one another and to the TV while the
TV is powered on. The Device List will automatically update to include
the newly-connected device. See page 102 for more information on
connecting i.LINK devices.
4
Press to select the desired device and display the device's i.LINK
Control Panel. Use the i.LINK Control Panel to operate the selected
device. For details, see page 105.
Sony DTV