Operation - Jonsered FC2245 Operator's Manual

4. Attach the strap (A) in correct position for grass
clearing or forestry clearing.
5. Tighten the hip strap tightly. Make sure that the hip
strap aligns with the hip.
6. Push the 2 parts of the breastplate together as
shown.
7. Attach the side belt to the breastplate.
8. To decrease the pressure on the rib cage and
shoulders, connect the side strap with the strap to
the hip pad. Recommended for women.
Introduction
WARNING: Before you operate the product,
you must read and understand the safety
chapter.
14
9. Tighten the elastic strap (B) to move more load from
A
10. Adjust the shoulder strap to make the product weigh
11. Adjust the side straps around the rib cage until the
12. Adjust the height of the suspension point. Refer to

Operation

Before you operate the product
•
•
the shoulder strap to the hip strap.
B
equally on your shoulders.
breastplate is aligned with the center of your chest.
Correct balance of the product on page 16 . For
forestry clearing, the correct height of the
suspension is approximately 10 cm/4 in below your
hip.
Examine the work area to make sure that you know
the type of terrain, the slope of the ground and if
there are obstacles such as stones, branches and
ditches.
Do an overhaul inspection of the product.
1145 - 001 - 09.04.2019