Important Safeguards - Sony KE-42M1 Operating Instructions (primary manual) Operating Instructions Manual

CAUTION
Use the following SONY appliance(s) only"with the following WALL-
MOUNT BRACKET. Use with other WALL-MOLLNT BRACKET may
cause instability and result in possible i11.iury.
SONY APPLIANCE MODEL NO.
KE-42M1
SONY WALL-MOLrNT BRACKET
MODEL NO.
SU-PW2
To Customers
Sufficient expertise is required for installing the specified product. Be
sure to subcontract the installation to Sony dealers or contractors and pay
adequate attention to safety during the installation.
ENERGYSTAR
As an ENEROYSTAR ®Partner, Son)' Corporation has
determined that this product meets the E_ERC_Y S TARs
guidelines for energy efficiency.
ENERGYSTAR _ is a U.S. registered mark.
Trademark Information
TruSnrronnd. TrnBass SRS and the (O) sylnbol are trademarks of
SRS Labs. Inc. TruSurrotmd teclmology is incorporated under license
from SRS Labs, Inc.
Licensed by BBE Sound. Inc. under USP4638258, 4482866. "BBE" and
BBE symbol are trademarks of BBE Sound, Inc.
H rn I
This TV incorporates High-Definition
TM C_
Multimedia Iuterf'ace (HDMI , ) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Wega, Stea@ Sonnd, Digital Reality Creation, Caption Vision, and
CineMotion are registered trademarks of Sony" Corporation.
Important
Safeguards
Before using your TV, please read these instructions completely, and
keep this mannal for furore reference.
Carefully observe and comply with all warnings, cautions and
ins_uctions placed on the set or described in the operating instructions or
service manual.
WARNING
To guard against injury the following basic safety precautions should be
observed in the installation, use and servicing of the set.
Use
Power Sources
This set should be operated only from the type of
power sonrce indicated on the serialilnodel plate.
If you arc not snre of the type of electrical power
supplied to your home, consult vonr dealer or local
power company. For those sets designed to operate
from battel) power, refer to the operating
instructions.
Grounding or Polarization
This set is equipped with a polarized AC power cord plug (a plug having
one blade wider than the other), or with a three-wire grounding type plug
(a plug having a third pin ±br gounding). Follow the instructions below:
For the set with a polarized AC power cord plug
This plug will fit into the power outlet only one way.
This is a safety featnre. If you are unable to insert
the plug fully into the outlet, try reversing the plug.
If the plug still fails to fit, contact yonr electrician to
have a suitable outlet installed. Do not dd'eat the safety ptu'pose of the
polarized plug by forcing it in.
Wall outlet
Do not use a poor fitting ontlet.
Insert the plug fully into the outlet. If it is loose, it may
cause arcing and result in fire.
Contact your electrician to have the outlet changed.
Wiring
Unplug the AC power cord when wiring cables.
Be sure to unplug the AC power cord for your safety', when hooking up.
Electric Shock
Do not tonch the AC power cord or the unit
with a wet hand.
If you plug/unplug the AC power cord from the
unit with a wet hand, it may cause electric
shock.
Cleaning
Clean the AC power plug regularly.
If the plug is covered with dust and it picks tip
moisture, its insulation may deteriorate and
result in fire. Unplug the AC power plug and
clean it regularly.