Sony KE-42M1 Operating Instructions (primary manual) Operating Instructions Manual page 13
Television - plasma: 42" flat panel color tv (plasma wega™)
Hide thumbs
Also See for KE-42M1 Operating Instructions (primary manual):
- Service manual (178 pages) ,
- Operating instructions manual (84 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Button
[]
Input Select
Buttons
[] VOL +....
[] RESET
[] PIC OFF
[] POWER
[] DISPLAY
[] SLEEP
[]
0 - 9 ENTER
[]
MENU
[]GD
[_F1
[] F2
[]
CH+ ....
Description
Press to select the video
equipment
connected
to the TV's video inputs.
TV: Press to select the TV to watch the
TV programs.
VIDEO
1/2/3: Press repeatedly
to cycle
through
the video
equipment
connected
to the VIDEO
IN 1 , the VIDEO
IN 2
and the VIDEO
IN 3.
If the video label is selected
as "Skip,"
the selected
input will be skipped
from
the cycle.
VIDEO
4: Press to select the video
equipment
connected
to the HDiDVD
IN 4.
VIDEO
5: Press to select the video
equipment
connected
to the HDMI IN
5.
Press to adjust the volume.
Press to reset the settings
to the factory
defaults.
See pages 60 and 62. Also
used to clear Channel
Label.
Press to turn off the TV screen.
For
details,
see "Using
the Picture
off
Function"
on page 48.
Press to turn on and offthe
TV.
Press once to display
the current
channel
number,
and channel
label. If
set, the cun'ent
channel
number
will
display
for 10 seconds.
Press repeatedly
until the TV displays
the time in minutes
(15, 30, 45, 60 or
90) that you want the TV to remain
on
before
shutting
off. To cancel Sleep
Timer, press SLEEP
repeatedly
until
Sleep Off appears.
Press 0 - 9 to select a channel;
the
channel
changes
after 2 seconds.
Press
ENTER
to change channels
immediately.
Press to display
the menu. Press again
to exit from the menu.
For details,
see
page 37.
Press t,/.!./_,/,*, to move
the on-screen
cursor.
To select an item, press
(_.
Press to select the function
of your
video equipment
which
is programmed
on the TV's remote
control.
Press to select the function
of your
video equipment
which
is programmed
on the TV's remote
control.
Press to scan through
channels.
To scan
quickly
through
channels,
press
and
hold down
either CH.
Button
[] (O)
TViSAT
Description
Press to select the sound effect modes:
TruSun'ound,
Off. The sound effect
modes
can be also accessed
in the
Audio menu. For more details, see
"Selecting
the Effect Mode"
on page
43.
When FUNCTION
is switched
on SAT/CABLE
Press to switch between
the TV and the
satellite
receiver.
[]
MTS SAP
GUIDE
Press repeatedly to cycle through the
Multi-channel TV Sound (MTS)
options: Stereo, Auto SAP (Second
Audio Program), and Mono. The MTS
setting can be also accessed in the
Audio menu. For more details, see
"Selecting Stereo or Bilingual
Programs" on page 62.
When FUNCTION is switched on SAT/CABLE
Press to display the program guide of
your satellite program provider.
¢Cl
-q
<
13
Advertisement
Table of Contents
