Table of Contents
Advertisement
Maintenance & Care
Cleaning the filter and screen
1. Turn hand vacuum OFF.
2. Unplug hand vacuum from electrical outlet.
3. Disconnect dirt container and filter assembly
from the unit.
4. Remove filter by grasping tabs on both sides
of filter frame and pulling away from the dirt
container.
5. Separate filter assembly by grasping tabs on
both sides of assembly and pull. For best results,
periodically tap filter and screen against trash
can to remove dirt that has collected.
6. Reconnect filter and screen by aligning
rectangular tab on filter with insert on screen.
Press together to ensure assembly is secure.
7. See page 5 to reattach dirt container.
NOTE: Dirt container and screen may be rinsed
with cold water. Ensure both are dry before
reinserting. Do not rinse pleated filter.
Storage/Cord wrap system
1. To store the unit, turn hand vacuum OFF.
2. Unplug hand vacuum from electrical outlet.
3. Bundle cord, using wrap that is located on
cord, to store.
Nozzle Maintenance
Keep nozzles clean and free of debris.
1. Wipe nozzles clean with damp cloth.
Troubleshooting
Problem
Possible causes
Power cord not plugged in.
Blown fuse/tripped breaker in home.
Hand vacuum
Thermal protector is activated.
won't turn on
Dirt container not installed
properly.
Hand vacuum
Dirt container is full.
won't pick
up or has
Filter or screen is dirty.
low suction
Nozzles are clogged with debris.
www.BISSELL.com
6
WARNING
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
4.
5a.
Insert
WARNING
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Remedies
Check electrical plug.
Check/replace fuse or reset breaker.
Turn OFF and unplug the unit. Empty
dirt container, clean filter and screen,
and clear any clogs. Wait 30 minutes
before turning the unit back ON.
Check assembly of dirt container
making sure it is snapped in.
Empty dirt container and reattach.
See instructions above. Replace filter
if needed.
Wipe tools clean with damp cloth
5.
6.
Tab
Hide quick links:
Advertisement
Table of Contents
