Lcc Control, Self Clean, Gas; Lcc190 Control, Self Clean, Gas - Whirlpool AER5522VAS0 Manual

LCC Control, Self Clean, Gas

LCC190 Control, Self Clean, Gas

Press BAKE for 5 seconds.
Press TEMP/TIME or
Press TEMP/TIME "+" or "-".
TEMP/HOUR "+" or "-".
Press START.
Action
Press CANCEL/CANCEL/START.
Press the TEMP/TIME or
Press TEMP/TIME "+" key.
TEMP/HOUR "+" key.
Press "+" again
"+" again
"+" again
"+" again will display 1 of the 3
"+" again
"+" again
*Press "DELAY START" to clear all fault codes
When checking for fault codes and "GOOd" is displayed, do not replace the control.
Temperature Adjustment
Previous Offset shown, or U-00 is displayed.
Adjusts temperature in 10⁰ F (5⁰ C) increments
between -30⁰F and +30⁰F.
Bake and Broil Temperatures are offset
automatically to the same degree.
If START is not pressed within 1 minute, adjustment
is ignored.
Diagnostic Mode
"tESt"
###⁰F or ⁰C
-30⁰F to +30⁰F
###
###
"CLr"
"GOOd"
F# *(Error Code - See Tech Sheet for Repair) ##
(Hours of operation at error code)
##
(Hours of operation at error code)
####
"00" (Door Open) or "01" (Door Closed)
*Press "START" to clear all fault codes.
1-
18
Models:
MGR8670WB0
MGR8670WB1
MGR8670WQ0
MGR8670WQ1
MGR8670WS0
MGR8670WS1
MGR8670WW0
MGR8670WW1
Display
(You are in the test mode)
(Oven Sensor Temperature)
(Oven Offset Temperature)
(Control Software Version)
(Control Memory Checksum)
(Good Control)
(Total hours of oven operation)
NOT
B, D, E, F, M