Gooseneck Microphones; Microphone Placement - Shure Legendary Performance MX412 User Manual

Gooseneck Microphones

Shure Microflex MX400S Series microphones are miniature gooseneck-mounted
®
electret condenser microphones designed primarily for speech and vocal pickup.
They can be mounted on lecterns, pulpits, or conference tables. All models include
a preamplifier and are available with interchangeable cardioid, supercardioid, or
omnidirectional cartridges.
• Wide dynamic range and frequency response for accurate sound reproduction
• Interchangeable cartridges that provide an optimal polar pattern choice for each
application
• Shock mount provides over 20 dB of isolation from surface vibration noise
• Snap-fit foam windscreen
• RF filtering
MX400 microphones are available with 305 mm (12 in.) or 457 mm (18 in.)
goosenecks, with or without a mute switch. They are available in supercardioid,
cardioid and omnidirectional polar patterns.
• "S" models include a mute button and LED.
• "D" models include a desktop base with programmable mute button and LED and
logic input and output.
• "SE" models feature a surface mount flange with side-exit cable.
The polar pattern of the included cartridge is indicated by a model number suffix:
/C Cardioid
/S Supercardioid
/O Omnidirectional
/N Cartridge not included
Interchangeable Cartridges
Microflex microphones use interchangeable
cartridges that allow you to choose the polar
pattern for different installations.
R183
Omnidirectional Supercardioid
Cartridge Polar Patterns
R185
R184
Cardioid
Snap-Fit Windscreen
Preamp Gain
If necessary, the preamplifier gain can be reduced by 12 dB. Contact an authorized
Shure service center for information.
C10
Q8
Q9
C11 C11

Microphone Placement

• Aim the microphone toward the desired source, such as the talker.
• Aim it away from any unwanted source, such as a loudspeaker.
• Place the microphone within 15 to 30cm (6 to 12 in.) of the desired sound source.
• Always use the supplied windscreen or optional metal windscreen to control
breath noise.
• If four or more microphones will be open at the same time, use of an automatic
mixer, such as the Shure SCM810 or SCM410, is recommended.
• Snap into the groove below the cartridge.
• To remove, spread the gap with a screwdriver
or thumbnail.
• Provides 30 dB of "pop" protection.
R6 and R4
Q2
Q3
Q1
Q5
Q7 Q6
R13 and R16
3