Telephone Operations - Binatone 410 User Manual

This telephone gives you the possibility to
Set Flash
services of your network provider.
Time
When pressing the RECALL button, the phone
interruption and the length depends on your Flash Time setting.
In standby mode, press SET/STO button.
1
The display shows ' SET 1 DATE '.
2
Press UP or DOWN button until the display
3 Press SET/STO to confirm.
4 Press UP or DOWN button to select 100
(default),300, 600, or 1000.
5
Press SET/STO button to confirm the setting.
The display shows ' SET 1 DATE ' , you can
programming, or press DELETE button to return to
standby mode.

5. Telephone Operations

Lift the Handset, listen for a dial tone.
Making a 1
The display shows ' 00-00 '.
call
2 Dial the telephone number you wish to call.
The display shows the number as you
14 digits will be shown).
3 To end the call, return the Handset to the
To answer a When the phone rings;
call Lift the handset or press the SPEAKERPHONE
on the Base unit.
The Call timer starts about 7 seconds after going on line.
To adjust the
During a call;
Adjust the volume of the speakerphone to your
speakerphone
volume level using the SPEAKERPHONE volume switch located at
volume
the right side of the Base unit .
To end a call Replace the Handset on the Base unit cradle or
press the SPEAKERPHONE button on the Base unit.
The SPEAKERPHONE light indicator will
To switch During a phone conversation through the Handset,
between the
press the SPEAKERPHONE button to speak
Handset and the
The Speakerphone light will turn on, but
Speakerphone
through the Handset until the Handset is speakerphone replaced
on the Base unit cradle. while in speakerphone mode,
Handset to enable a private conversation.
Telphone Operation continue...
Last 1
Lift the Handset or press the SPEAKERPHONE
the Base unit.
Number
Press LNR button.
Redial 2
The phone automatically dials the last
(maximum of 32 digits).
Mute 1 During a call press MUTE button.
Function
When the mouthpiece is muted, the person
end of the call cannot hear you but you can hear his side.
2
To get back to the call, press MUTE
Inserting a
For some switchboard system, an access number
dialed (usually an 8 or 9) to get another
Pause in
outside line.
the dialing
sequence 1 Pressing PAUSE button immediately after the
number, a pause of about 3.6 seconds
and the desired number can be dialed immediately.
2
Press PAUSE button to insert a pause when dialing or
storing Long Distance Access Codes.
If you are using your Spirit 410 phone on a PBX,
Use on PBX
user guide tells you to press RECALL;
Press R (RECALL) button on your
use the special services
Storing a 1
Number in
generates a line
M1,M2,M3
memorys
2
3 2
shows 'SET 3 FLASH'.
3
Dial out
2
Stored
number
3
continue with
Storing a 1
Number in
(0-9)
2
two-touch
memorys
3
dial(maximum of Dial out
1
Stored
number
Base unit. 2
(0-9)
two-touch
memorys
button
6. Caller Display Operation
VERY IMPORTANT:
comfortable
To use Caller Display you must first subscribe to your network provider's
If you subscribe to a Caller Display service, you can see the phone number
you before you answer. The caller display information
includes:
The caller's number
Condition of Incoming Caller Information
turn OFF.
It is a duplicate one
It is a new one
I t has exceeded the range of the service
hands-free.
It is a secret one
conbrtdsyion remains
It may not be nicety for the reason of outside
There is a voice information in your mailbox
lift the
(This function is available only when you have
applied for this service from your telecommunication
network)
button on
Caller Display list
Spirit 410 dynamically stores up to 30 groups (12digits) incoming information.
If a call is received when the Call list is full, then the new entry will replace the oldest one.
number you called
Viewing the 1
Caller
Display list
at the other
2
button again to release.
must be
To return
dial tone and an
a call
access
will be entered,
To delete
Caller Display
record
and the PBX
Spirit 410 phone.
In standby mode, Key in the telephone number you
wish to stored.
Up to a maximum 16 digits.
Press SET/STO button.
Press M1.M2,M3 button to stored.
Lift up Handset or press the SPEAKERPHONE button,
press M1,M2,M3 buttons.
The number dials automatically.
In standby mode, Key in the telephone number
you wish to stored.
Up to a maximum 16 digits.
Press SET/STO button.
Press the (0-9) button to store the number in the
selected memory.
The number dials automatically.
Caller Diaply service.
of the person calling
The date and time of the call
LCD Screen will display
REP
NEW
UNAVAILABLE
WITHHELD
ERROR
In standby mode, press UP or DOWN Dutton.
The display shows the most recent record.
If there are no Caller Display records, the display
will show
' 00 CALL'
Press UP or DOWN again to scroll to the next
Caller Display record.
When the Caller Display record is displayed.
Lift the handset or press the SPEAKERPHONE button on
the Base unit.
The phone automatically dials out the displayed record.
When the Caller Display record is displayed.
Press DELETE button will delete the Caller Display record.
The display shows the next Caller Display record.
Press and hold DELETE button 3 seconds,
all the Caller
Display records will be deleted.
The display automatically return to standby mode.
7. Guarantee and service
This product is guaranteed against manufacturing defects for a period of 1 Year.
This does not cover the product where the fault is due to misuse, abuse,
of the instructions, or where the product has been the subject of unauthorised modifications
or alterations, or has been the subject of commercial use.
In the event of a problem with the product within the guarantee period
your nearest Argos store.
If the item is shown to have had an inherent defect present at the time of sale,
provide you with a replacement.
Your statutory rights remain unaffected.
Guarantor; Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
8. Technical details
Standard Spirit 410 Telephone
Temperature range Operating 0 ºC to 40 ºC
Storage -20 ºC to 60 ºC
PBX compatibility Timed break recall: 98 ms. Pause length: 3.6 seconds.
Signalling type: DTMF (dual-tone multifrequency) also called tone dialing.
Network connection This equipment is intended to be used in the UK only.
Operation on other countries' PSTN termination points cannot be guaranteed.
Declaration of conformity
The Binatone Spirit 410 phone complies with the essential protective
requirements and objectives of:
EC Low Voltage Directive 2006/95/EC
EC R&TTE Directive 1999/5/EC
EC EMC Directive 89/336/EEC
and conforms to the following relevant harmonized standards:
Network: TBR37, TBR38
Waste electrical products must not bedisposed
EMC: EN 55022, EN 55024 of with household waste.
This equipment should be taken to your local
Safety: EN 60950
recycling centre for safe treatment.
Binatone operates a policy of continuous product improvement, and so
make changes to the product and functions without notice.
Binatone Help Line - 0845 345 9677
Calls are charged at Local Call rate.
Connection and conditions for use
You can connect your Spirit 410e phone to a direct exchange line (DEL) -
connected to a local exchange, with its own phone number; to an
socket connected to a DEL; or to an extension on an approved
Do not connect the Spirit 410 phone as an extension to a pay phone.
The ringer equivalence numbers (RENs) of all instruments (phones, fax
etc.) connected to an exchange line must not add up to more than
one or more of them may not ring and/or answer calls correctly.
The Spirit 410 phone has a REN of 1, and most other telephones have a
unless marked otherwise.
Contents of this User Guide
1. Where to find it
If you need help ...
2 . I n s t a l l a t i o n
The Binatone Help Line is
3 . Wall mount installation
available from 9.00 am to
4 .
Setting up your phone
5.00 pm, Monday to Friday, on
5 . Telephone operation
6 . Caller display operation 0845 345 9677
7 . Guarantee and service
Calls are charged at Local Call
Technical details
8 .
rate.
Pressing buttons on your phone
When the instructions in this user guide tell you simply to 'press' a
you should press the button briefly, then release it.
When the instructions tell you to 'press and hold' a button, this means you should
keep the button pressed until the display changes and/or you hear a tone.
use in contravention
please return it to
the store will
reserves the right to
a line
extension
compatible PBX.
machines,
4 - otherwise,
REN of 1
button, this means that
UK Argos Ver2 Jan 2008