Table of Contents
Advertisement
Troubleshooting
Power (continued)
Symptom
The Reader cannot
be turned on.
Screen
Symptom
It takes time for the
display to appear.
You cannot select
items even if you tap
the center of them.
The screen is frozen. Reset the Reader by pressing the
A page in the Reader
Store is not displayed
properly.
Cause/Remedy
Moisture condensation may have
occurred. Wait for a few hours and
then turn on the Reader.
Battery power has been fully
depleted. Charge the Reader via an
AC outlet (
Make sure that the battery pack is
installed properly, then slide the
POWER switch to ON (
16).
Cause/Remedy
In a cold place such as outdoors, it
may take time for the display to
appear. This is due to the display
characteristics and not a
malfunction.
Calibrate the touch screen from
"Calibrate Touch Screen" in the
"Advanced Settings" menu (
157).
RESET button. Then, slide the
POWER switch to activate the
Reader again (
Make sure that the battery pack is
installed properly, then slide the
POWER switch to ON (
16).
The wireless connection may have
been interrupted. Make sure the
WIRELESS switch is set to "ON"
and a wireless network is available
(
page
34), then refresh the page
using "Refresh Page" in the option
menu (
page
page
22).
page
page
160).
page
39).
Continued
12,
page
12,
163
Advertisement
Table of Contents
