7360 ISAM WM shelf cabling
22.5 Power Cable
The 7360 ISAM WM shelf operates with nominal voltage levels of −48 V dc as well
as − 60 V dc supplied by the 7360 ISAM WM power card. This power card is
connected to the power terminals of either the 7360 ISAM FX-16, 7360 ISAM FX-8,
or 7360 ISAM FX-4 shelf through a power cable.
22.5.1
The 7360 ISAM WM shelf is only mechanical equipment, and must be used in
conjunction with the 7360 ISAM WM power card (FWPC-A), which provides the
entire 7360 ISAM WM shelf with power.
The 7360 ISAM WM power card is inserted in the middle of the 7360 ISAM WM
shelf; see Figure 236. Two 7360 ISAM WM power cards can be used to provide
power redundancy.
Figure 236
410
Power card and power cable routing
Power distribution on the 7360 ISAM WM shelf
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
Power Interface
FWPC-A
FWPC-A
FWPC-A
RUN
ALM
RUN
ALM
PW1
PW2
PW1
PW2
S1
S1
PW1
PW1
S2
S2
PW2
PW2
DRAFT
25783
Issue: 09