Sony RDR-VX555 Operating Instructions Manual page 37

Button
(fast reverse/fast
forward)
(slow)
X PAUSE
To resume normal playback after playing at various speeds, press H PLAY.
z Hints
• You can change playback options, such as subtitle,
audio track, angle, etc., using the OPTIONS menu
(page 11).
• During playback or pause mode, the recorder's m/
M buttons and the remote's .PREV/>NEXT
buttons work the same way (page 36). Hold the buttons
down during playback to fast forward or fast reverse. In
pause mode, you can play in slow motion. Three speeds
are available, depending on the duration of the press.
• See "DVD Audio/Subtitle Language" on page 120 for
the meaning of the language abbreviation.
Notes
• If you pause playback of a CD, or DATA CD/DATA
DVD containing MP3 audio tracks, playback will not
start until you press H PLAY or X PAUSE.
• Sound will be interrupted during Scan Audio
(page 38).
Operation
Fast reverses or fast forwards the disc when pressed
during playback.
Search speed changes with each press:
fast reverse
FR1 T
*2
T T
FR2
*3
FR3 T T T
Plays in slow motion when pressed in pause mode.
Playback speed changes with each press:
reverse slow motion
T
T T
T T T
Pauses playback.
If you pause playback for more than five minutes,
playback starts automatically.
fast forward
*1
t FF1
*2
t t FF2
*3
t t t FF3
forward slow motion
t
t t
t t t
Notes on playing DTS soundtracks on a CD
When playing DTS-encoded CDs, excessive noise
will be heard from the analog stereo jacks. To
avoid possible damage to the audio system, the
consumer should take proper precautions when
the analog stereo jacks of the recorder are
connected to an amplification system. To enjoy
DTS Digital Surround™ playback, an external
5.1-channel decoder system must be connected to
the digital jack of the recorder.
Notes on playing DVDs with a DTS soundtrack
DTS audio signals are output only through the
DIGITAL AUDIO OUT (COAXIAL or
OPTICAL)/HDMI OUT jack.
When you play a DVD with DTS soundtracks, set
"Digital Out" – "DTS" to "On" of "Audio" in the
"Setup" display (page 98).
If you connect the recorder to audio equipment
without a DTS decoder, do not set "DTS" to "On"
in "Audio" setup. A loud noise (or no sound) may
come out from the speakers, which might disturb
your ears or cause damage to the speakers.
Disc
All discs
*1
FF1 with sound
(Scan Audio) is
available for DVDs
with Dolby Digital
soundtracks.
*2
FR2 and FF2 are not
available for MP3.
*3
FR3 and FF3 are only
available for DVDs
and VIDEO CDs.
+
RW - RW - RW
VR
Video
- R - R
+
R
VR
Video
*
RAM VCD
DVD
* Playback direction
only
All discs
,continued 37